Recessed Lighting

Recessed Lighting

Product Ideas for LED Lighting

 

This article assumes you are already convinced about going ‘LED’ but want some specific product ideas. In this article I would like to present 3 general product categories that can be used to begin your transition to LED lighting. Each idea is going to have more than one product possibility that can be tailored to your exact needs. Also, each individual product itself may various options. We will discuss some of these options and how you should go about selecting each. This is important as LEDs are a new technology and not everyone knows what options are available or even exactly how to choose them.

 

The first product category is LED PAR Lights. The word PAR is an abbreviation for parabolic reflector. This is actually not applicable to LEDs since they have lenses and are no longer dependent on reflectors to create directional light. In fact the lenses on LED lights are much more efficient than reflectors. LED light is directional and can be controlled precisely with the use of lenses. As long as we are talking about lenses that is going to be the first thing you will have to make a choice on. LED PAR lights can be purchased with various lens angles. Usually you will have choices like 30, 45, and 60 degree lenses. The lens controls the angle of the light. The tighter the angle the more concentrated the light, and the wider the angle the more diffuse the light, but a greater area will be illuminated. A 45 degree angle is possibly most all purpose but aesthetically, and mathematically thirds are nicer or a 60 or 30 degree angle. Use 60 for general purpose and 30 for spotlighting.

 

Next when you order a PAR light you would have to select the color. One of the advantages of LEDs is that you can select precisely the color of the light. Common options are warm white 2,800 – 3,800K, commercial white 4,000 – 5,000K, and pure white 6,000 – 6,500K. Each color has its advantages depending on the situation. Warm white is best for creating atmosphere, while pure white is a bit brighter and produces more lumens per Watt. For security lighting you would use pure white, for a bar most likely warm white.

 

Finally, in the case of LED PAR lights you would have to select the number of Watts. I generally advise multiplying by 5 to 10 when comparing to incandescents. So a 5 Watt LED is like a 25 – 50 Watt incandescent. Technically the number should be 5 but in addition to producing more light LEDs focus it better, and this can increase the multiple to about 10. When making your selections keep in mind it is difficult to stock every possibility. If you want commercial white with a 45 degree lens you may have to put in a request. Try to plan in advance slightly, and the extra wait is well worth it.

 

The next category is LED recessed lights. LED recessed lights offer similar options on color and lens angle. In the case of ceiling lights you would have to choose the number of LEDs. Common is 3 Watt LEDs so for example you could get lights with 3 LEDs for 9 Watts or 5 LEDs for 15 Watts and so on. You can use the above multiplication to decide on the number of lights. LED recessed lights generally come in their own housing and so are easy to install. LEDs do not produce much heat, but remember to not put insulation directly on top of the light. I don’t think you were going to do that. LED recessed lights can have adjustable heads and hardened glass coverings. Using a grid of such lights to light a large area can create a nice effect. Properly placed LED recessed lights can be a nice addition to your home lighting.

 

Finally, I would like to briefly mention light bars, and light strips. These can be used for accent lighting, cabinet lighting, and wall lighting. Again properly placed these can be used to achieve some very nice effects. If you are designing a new addition to your house you may want to use light bars or light strips to highlight the features or add a more subtle lighting.

 

Before I go too long that’s it for this article. Properly used LED lighting can greatly enhance architectural features all the while offering a green solution to your lighting needs.

About the Author

Robert Badaracco

LEDHomePlace

How To Install Recessed Lighting In Plaster Ceiling?

Hi,
I'm wanting to install some recessed lights above my bathtub in my older home. I'm pretty confident about the actual install, but worried about cutting the hole through the plaster (and more specifically the lathe). It is open attic above, so I have easy access to either side. Any thoughts on getting the hole through without shattering the ceiling? Or is it a pipe dream to think I'm going to get a clean hole? Thanks!

Take a small peice of plywood, Cut your clean hole in that.
Put it above the ceiling where the light will be and screw throught the ceiling and lath. close to the hole, but not too close it'll crack the plaster. Be sure you hit all the lath boards.
this will help hold the lath when cutting. and check the hole with the light before hand
Mark your circle. Cut the plaster with utility knife to start. then use old hacksaw blade , router with masonary bit etc
Don't use recip. or circular power saws.

Recessed lighting

Good Earth Lighting, Inc. G9524CLR-I 24-Foot Rope Lighting, Clear $11.50 You've seen them in restaurants and theaters--those tubes full of lights proprietors use to mark stair edges and other potential hazards that might be fallen down or tripped over in dim light. That's not to say that Good Earth Lighting's rope lighting products can only be used in public venues--you could use them as funky accent lighting in a living room, party lighting, or to outline a path in yo...

GE Lamps 16241 120-Watt BR40 Reveal Floodlight $11.99 For indoor use only....

Pharox III DIMMABLE LED 6 Watt LED Light Bulb - 60 Watt Incandescent Replacement Bulb $47.95 This Pharox bulb from Lemnis Lighting offers light quality comparable to that of a traditional 60W light bulb. The Pharox bulb is 90% more energy efficient than an incandescent bulb, and is based on a breakthrough and patented technology that opens the lighting market to LED technology. The warm white lamp sheds a warm white sunset golden color, ideal for creating a warm atmosphere. This bulb is a...

Feit Electric 65BR30/FL/MP-130 65-Watt BR30 Indoor Reflector Flood Light, White, 6 Pack $11.56 Designed for recessed and track lighting, replaces standard incandescent R-30 bulbs. Brass base resists vibration and corrosion. 2,000 average life hours on a 130 volt line, 5,600 on a 120 volt line. 5-3/8" overall length....

85 Watt Incandescent Flood Light Bulb / BR30 Shape (3.75 Diameter) / 130 Volt, Long Life Incandescent / 85BR30 $2.99 130 volt incandescent products work with standard 110-120 volt household systems. The advantage of 130 volt products is that they protect the incandescent filaments from power spikes (the source of most incandescent bulb failures). 130 volt bulbs are slightly less bright than 120 volt, but offer substantially longer life....

Westcott Apollo 28 Light Modifier with Recessed Front $124.00 Apollo are constructed using an umbrella frame. No speed rings are needed, just use the umbrella receptacle on your light. Easy opening and closing means easy set-up and takedown. The square or rectangular shape allows you to scrim or control the light more readily. For direct diffusion, position the light facing the white diffuser panel. The light will have a bright center with a soft edge. The ...

Osram Sylvania 20683 CF18DD/E/827/ECO 18-watt Compact Fluorescent Plug In Light Bulb PL-C, 4 Pin, Quad Tube, 2700K $3.99 DULUX 18W double compact fluorescent lamp with 4-pin base, integral EOL, 2700K color temperature, 82 CRI, ECOLOGIC...

Klipsch LightSpeaker System 5.2.2 Wireless Sound and Efficient LED Lighting $599.99 wireless speaker kit includes 2 speakers, 1 transmitter, and 1 remote * LightSpeakers install in standard 5" or 6" recessed ceiling light fixtures * control playback with the included transmitter and remote * long-lasting replaceable LED lightbulb * built-in 20-watt digital amplifier *...

LED Boat Interior Lights (Recessed mount) Replace your quicktoburnout incandescent bulb interior lights with reliable LEDs. They produce bright light and use a fraction of the power of traditional bulbs. They don't heat up and, best of all, they last 100,000 hours no more bulbs to replace. Available: Livewell Light For livewells, lockers or compartments. Waterproof, can be used above or below water level with throughwall mounting. 10year ...

Lumitec LED Mini Rail Lighting 5 Inches Red Attractive Design Mounts Certified Intrinsically Safe New $45.99 Lumitec is a company that was conceived and designed to overcome these challenges and leverage these opportunities....