Drywall Taping

Drywall Taping

The Proper Way to Paint Your Drywall

Before you consider painting your drywall, you have to remember that this is a fairly specialized task. However, if you have the proper equipments or tools and do the necessary preparations, you will find that it can be achieved by nearly everyone.

When painting drywall, you have to know about the step-by-step process in doing it properly. If you neglect to do at least one of the processes, you will end up with a painting job that looks quite amateurish.

The first step in painting drywalls is by making sure that the weather is not too humid and it should be fairly warm. You also have to make sure that the surface or the drywall you are planning to pain is dry, free from oil and grease, and that it is completely clean.

You also have to apply 3 coats of joint compound on the drywall and the joints between the panels should be taped with fiberglass or paper mesh tape or drywall tape. By doing this, you will ensure that the joint gets surfaced over. You also have to make sure that you fill in any cracks or marks using the same method.

You also have to clean the walls and ceilings that you intend on painting by wiping off the dust. Do this before priming. After the prime coat has dried, the next step is to sand the surface lightly with a fine grit sandpaper. This will enable you to smooth any imperfections, and raised fibers as well as rough chips. Always keep in mind that you need to wear goggles and mask as the gypsum dust produced when sanding drywalls can be very irritating to the eyes and is known to cause breathing problems.

You should also take care in removing dust from the top of your doorway as well as in the window trims. You also have to use drop cloths in order to protect finished flooring as well as doors, windows, and other fixtures. It is highly recommended that you use a painter’s plastic to do this.

You need to keep in mind that after you taped the drywall and sanded it, you shouldn’t allow the drywall to sit too long. The sunlight can cause the drywall to yellow and fade. In fact, it can look uneven even after painting it. Use a good quality latex stain-killing paint before you prime it in order to fight the yellowing process.

Two coats of paint should be enough. On the first coat, use a low sheen, latex flat wall paint. This should be tinted to match the color of the top coat. For the top coat, use two coatings of gloss paint, which includes eggshell and satin paint. This will leave you with a finish that is easy to wash and one that is not prone to smudges and marks. For the roof, flat paint is a good option.

Always remember that with the proper equipments and preparation, you will be able to have a professional looking finish when painting your drywall.

About the Author

If you don’t know anything about how to tape drywall, then it may be time for you to learn.

For more useful information and great advice please visit my site:

A Beginners Guide On How To Tape Drywall

What percent of drywall taping is spent on taping butt joints?

Most drywall joints are with tapered edges. Some are with butt joints. What percent are butt joint tapings?

about 30%........strange question

lic. gen. contractor

Drywall taping tools, AutoTaper in action

3M MPG-9 9 Hand Masker General Purpose Masking Paper 60 Yard Roll $2.29 3M Hand-Masker Masking Paper is available in two grades: general purpose or premium quality. Premium quality is designed to minimize bleed-through and general purpose paper is ideal with water-based coatings....

3M MPG-12 12 Hand Masker General Purpose Masking Paper 60 Yard Roll $2.99 3M Hand-Masker Masking Paper is available in two grades: general purpose or premium quality. Premium quality is designed to minimize bleed-through and general purpose paper is ideal with water-based coatings....

Access Door With Drywall Taping Bead - 10 X 10 Access Door With Drywall Taping Bead - 10 x 10 Designed specifically for installation in drywall walls & ceilings after the drywall has been installed. The door flange is perforated as taping bead, with pre-punched holes. The door panel is formed with flanges on four sides, to operate freely with no binding, sagging, or distortion. 1 Latch. White Finish. 12-4/7"W x 12-4/7"H Outside Flange Dimensio...

Drywall Hanging & Taping [VHS] $9.95 ...

Goldblatt Blue Steel Taping Knife, Neon Handle ...

Goldblatt G15850 Blade Runner Drywall Cutting Tool $29.99 Cut both sides of drywall simultaneously using magnets to guide bottom cut. Works with 1 2'' or 5 8'' board. Cut curves, corners, shapes, and straight lines with ease. Reduces time it takes to score and cut drywall....

Porter-Cable 7800 4.7 Amp Drywall Sander with 13-Foot Hose $459.00 Porter-Cable's drywall sander is currently the only one of its kind. While this may have momentarily eliminated competitive pressure, Porter-Cable still put together a high-quality tool. Long enough to sand 10-foot ceilings from the ground, lightweight (8 pounds), and able to suck up the vast majority of the fine, potentially harmful dust with an attachable vacuum, this drywall sander impressed us...

Drywall: Hanging and Taping (Fine Homebuilding DVD Workshop) $12.69 ...

Drywall:Hanging and Taping $19.95 ...

Heritage 8 Pocket Drywall Tool Pouch (No. 485) $21.89 HERITAGE LEATHER CO. - Quality Products, RIGHT HANDED...

Drywall $15.98 Drywall : Hanging and Taping (Fine Homebuilding DVD Workshop) by Myron R. Ferguson DVD Published in 2004 by Taunton

Red Devil 4120 Taping Knives $11.47 Red Devil 4120 Taping Knives Professional quality putty knives, wall scrapers, and taping knives with nail setting head. Polished wood handle. Precision ground, rust resistant lacquered steel blade extends through handle for flexibility and long life. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs. Red Devil 4120 Taping Knives Features: • 6" (15.2 cm) Flex • Labeled • Professional quality putty knives, wall scrapers, and taping knives with nail setting head • Polished wood handle • Precision ground, rust resistant lacquered steel blade extends through handle for flexibility and long life • The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs • Flexible • 6" • Carded

Red Devil 4214 Taping Knives $8.08 Red Devil 4214 Taping Knives Professional quality putty knives, wall scrapers, and taping knives. Black nylon solvent-resistant handle is designed for maximum safety and dependability. High-carbon, precision-ground steel blade is lacquered to prevent rust and extends through handle. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs Red Devil 4214 Taping Knives Features: • 4" (10.2 cm) Flex • Labeled • Shatterproof polypropylene handles • High-carbon steel blades • Flexible blade • 4"

Red Devil 4216 Taping Knives $8.53 Red Devil 4216 Taping Knives Professional quality putty knives, wall scrapers, and taping knives. Black nylon solvent-resistant handle is designed for maximum safety and dependability. High-carbon, precision-ground steel blade is lacquered to prevent rust and extends through handle. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs Red Devil 4216 Taping Knives Features: • 5" (12.7 cm) Flex • Labeled • Shatterproof polypropylene handles • High-carbon steel blades • Flexible blade • 5"

Red Devil 4218 Taping Knives $8.95 Red Devil 4218 Taping Knives Professional quality putty knives, wall scrapers, and taping knives. Black nylon solvent-resistant handle is designed for maximum safety and dependability. High-carbon, precision-ground steel blade is lacquered to prevent rust and extends through handle. The brass-plated, solid steel nail setting head can be used for setting drywall nails and other hammering jobs Red Devil 4218 Taping Knives Features: • 6" (15.2 cm) Flex • Labeled • Shatterproof polypropylene handles • High-carbon steel blades • Flexible blade • 6"

Red Devil 4726 Taping Knives, Plastic $4.22 Red Devil 4726 Taping Knives, Plastic Promotional quality plastic putty knives, scrapers and adhesive scrapers. Red Devil 4726 Taping Knives, Plastic Features: • 6” (10.2 cm) • Promotional quality plastic taping knife • Can be used for drywall application • Disposable • 6"

Acudor DW-5040 Drywall Access Door 10 x 10, White $31.74 Acudor DW-5040 Drywall Access Door Flush for Drywall, complete with Drywall Bead Flange • Flush for drywall surfaces • Flange is textured drywall bead with pre-punched holes • Continuous, concealed hinge Acudor DW-5040 Drywall Access Door Description The Acudor DW-5040 is designed specifically for installation in drywall walls and ceilings after drywall has been installed. The flange of the door is a textured galvanized steel taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and screwdriver operated cam latches allow the door panel to operate freely with no binding, sagging or distortion. Acudor DW-5040 Drywall Access Door Specifications Access Door Material: Steel or Stainless Steel: 14 gage door, 14 gage mounting frame. Access Door: Flush to edge of frame. Access Door Frame: Galvanized steel drywall taping bead on all sides. Access Door Hinge: Continuous, concealed. Access Door Latch: Stainless Steel screwdriver operated cam latch. Access Door Finish: Steel: 5-stage iron phosphate preparation with prime coat of white baked enamel. Stainless Steel: #4 satin polish. * Dimensions are W x H

Acudor DW-5040 Drywall Access Door 12 x 12, White $32.76 Acudor DW-5040 Drywall Access Door Flush for Drywall, complete with Drywall Bead Flange • Flush for drywall surfaces • Flange is textured drywall bead with pre-punched holes • Continuous, concealed hinge Acudor DW-5040 Drywall Access Door Description The Acudor DW-5040 is designed specifically for installation in drywall walls and ceilings after drywall has been installed. The flange of the door is a textured galvanized steel taping bead with pre-punched holes. Drywall compound is applied over the beading at the same time the drywall joints are finished. When the application is completed, only the door panel remains exposed. Our unique concealed hinge and screwdriver operated cam latches allow the door panel to operate freely with no binding, sagging or distortion. Acudor DW-5040 Drywall Access Door Specifications Access Door Material: Steel or Stainless Steel: 14 gage door, 14 gage mounting frame. Access Door: Flush to edge of frame. Access Door Frame: Galvanized steel drywall taping bead on all sides. Access Door Hinge: Continuous, concealed. Access Door Latch: Stainless Steel screwdriver operated cam latch. Access Door Finish: Steel: 5-stage iron phosphate preparation with prime coat of white baked enamel. Stainless Steel: #4 satin polish. * Dimensions are W x H